Base of the Bot
- Take the cardboard and drill holes with the help of drilling machine as per the requirement. Proper care must be taken while drilling the holes and see that the screws fix perfectly.
- After you drill the holes fix the wooden blocks to the base of the cardboard this is done to raise the level of the base from the ground.
- Fix a 45 rpm motor which is used for rotation of the arm which the help of a small cardboard placed at the bottom end of the motor and attached to the base with the help of nuts and screws.
- While fixing the Rotating arm Motor proper care must be taken that the motor shaft is perpendicular to the base.
- Two 300 rpm motors are fixed to the base with the help of ‘U’ clamps, nuts & scews.Proper care should be taken such that the two motors align parallel to each other.A free rotating wheel is fixed to the fornt end of the base.Wheels are fixed to the shafts of the two 300 rpm motors
0 comments:
Post a Comment