===================================================================
vamsi and rakesh were my school friends and we want to get into the robotic contest. Vamsi was inspired by the robots that he had seen in IIT Madras fest shaastra so he said lets design a robot. Then the things started we didnt know how to start what to do where to go. We started searching things at that time internet was not that popular now we get every thing in the internet but at that time things were different.Then the idea of using a motor and using the rod and axle came just what we see in the busses and trucks.Our budget was very low and we did not want to waste things buying unnesseary things.So at last we decided to buy a motor and experiment on that but which motor what should be the rpm we didnt know.We went to the gujrati galli were we get all the electronic things opposite the bank street we went their.I exactly dont remember how we came to know about the gujrati galli but I and vamsi went there.We went to Roaland electronics shop their the shopkeeper was asking about what kind of motor the rpm.We didnt decide about these thing so we went back and then started searching for the different types of motors.
vamsi and rakesh were my school friends and we want to get into the robotic contest. Vamsi was inspired by the robots that he had seen in IIT Madras fest shaastra so he said lets design a robot. Then the things started we didnt know how to start what to do where to go. We started searching things at that time internet was not that popular now we get every thing in the internet but at that time things were different.Then the idea of using a motor and using the rod and axle came just what we see in the busses and trucks.Our budget was very low and we did not want to waste things buying unnesseary things.So at last we decided to buy a motor and experiment on that but which motor what should be the rpm we didnt know.We went to the gujrati galli were we get all the electronic things opposite the bank street we went their.I exactly dont remember how we came to know about the gujrati galli but I and vamsi went there.We went to Roaland electronics shop their the shopkeeper was asking about what kind of motor the rpm.We didnt decide about these thing so we went back and then started searching for the different types of motors.
After few days we again went to the gujrati galli and we bought a servomotor of 500 rpm and then started designing the robot.Then the arrangement of rod and axcel was the problem.So we thaught we should try for gear rod assembly in the market.This time vamsi and rakesh went to the galli and bought the Rack and pinion and that was not fixing in the motor shaft waste of money but we got a good experience from that.
Thing were not working so I approched a professor he suggested that the gear rod assembly would be difficult so better go for two motors of same rpm.Then we baught 2 motors and then started building the robot.Then vamsi brother srawan joined our team he is good in handling things.Most of the time we used to forget something or the other we baught motors cardboard wires ... but we forgot to buy screws from then when ever I think of a project first I will write things on paper the kind of experimental difficulties...
Finally our robot was done it was working well but connections were bit loose but it was working well everyone was our overjoyed.That was about Tinku robot we designed for a contest.It thaught me to put things on paper.
0 comments:
Post a Comment